DISCONTINUED Davicom DV-Micro Remote Control & Monitoring System

Davicom Logo

Davicom DV Micro Remote Control


The Davicom DV-Micro is designed to handle your small-budget remote-control & monitoring needs. I/O capability includes 8 metering, 8 status and 8 relays, and communications is achieved over dial-up or IP networks. The DV-Micro operates with the same Graphical User Interface (GUI) as other Davicom products, so personnel can easily control all sites, from the smallest to the largest, with a unit from the Davicom family.

The DV-Micro is just as intelligent as other Davicom units with extensive condition-driven and event-driven programming capabilities. It boasts the industry’s widest choice of communication means, including: voice/DTMF, PC, FAX, E-Mail, pager, text messaging and Web Browser. It also allows easy access via a Blackberry ® or smart phones.

Technical Specification

Technical Specification

Electrical Specifications




Metering (Analog) Inputs


Resolution: 12 bits;Single-ended inputs;0-5V, with attenuation ranges selectable on external I/O board.Impedance > 100 kOhms;

Status (Digital) Inputs


EIA compatible;Opto-isolated;Impedance > 22 kOhms;Detection levels: -12 to +0.8 VDC (low), +2.4 to +12 VDC (high).

Audio Input


-20 to +10 dBm (300-3000 Hz); Impedance 10 kOhms.

Outputs (Commands)


Selectable NO/NC dry contact relays (70 VAC @ 0.4 A, 30 VDC @ 2 A) or open collector (100 mA)

Auxiliary DC Outputs

5 VDC @ 250mA max, 12VDC @ 500mA max >> Total combined 750mA max

Local Access Port


115200 bps, USB Type B connector located on front panel.

Serial Ports for On-Site Ancillary Equipment through USB Hub & Dongles


1200 to 115200 bps, DB9 male on USB dongles connected through USB hub.

Extra Ports for External Modems through USB Hub


USB modems required. Must support Linux CDC drivers.

Internal Modem


RJ-11 jack located on rear panel;Voice/Fax/Data;56 kbps maximum;Fax up to 14400 bps;DTMF interface.

External USB Storage through USB Hub


Up to 4 external USB memory devices. FAT32 formatted devices only.

Real Time Clock (RTC)

Standard: 20 PPM accuracy, stability of 1.25PPM/°C between -10 & +60°C.TCXO Option: 3.8 PPM between -10°C & +60°C. Equivalent to 10 seconds per month.

Power Requirement

11.5-14.5 VDC, 1 A Max.


250 V, 3 A

Electric Fields

Tested to 10 V/m

Electrostatic Discharge (ESD)

Tested to 12 kV

Operating Temperature Range

0 to 50°C (32 to 122°F)-40 to 70°c available


0 to 50°C (32 to 122°F)-40 to 70°c available


0 to 50°C (32 to 122°F)-40 to 70°c available

0 to 50°c (32 to 122°F)

-40 to 70°c available



Dimensions 1 RU, half width8.5 x 1.75 x 12 in (W x H x D)21.6 x 4.4 x 30.5 cm
Weight 4 lbs (1.8 kg) dry5 lbs (2.3 kg) shipping

RoHS Status: RoHS Compliant

Product Resources

Comments are closed.