DISCONTINUED Innes Auricon 1.1 PCI Analogue Sound Card

innes_logo

Auricon-1.1

Summary

DISCONTINUED AND REPLACED WITH AURICON 1.3b

Please note that this product is currently discontinued until further notice. For large quantity orders of this product please contact our sales department.

Features

  • Unbalanced stereo input and output on gold-plated RCA connectors
  • Inputs and outputs can be electronically floated to eliminate ground loops
  • Reconfigurable as two independent mono inputs and outputs
  • 24-bit A/D and D/A converters
  • Full Windows audio functionality Microsoft-certified for Windows 2000, XP and Server 2003

Overview

This professional-quality PCI sound card offers unbalanced stereo input and output at the standard 2Vrms line level, and is fully compatible with the Wave, DirectSound, DirectShow and MCI API’s. The card can also be reconfigured to operate as two independent mono channels.

The inputs and/or outputs can be either grounded to the PC chassis or electronically floated to eliminate ground loop problems.

24-bit A/D and D/A converters are used along with an on-board digital signal processor that provides audio buffering, sampling rate conversion, level adjustment, mixing and bus-master transfers to and from the PC. All of the common sampling rates from 8kHz to 48kHz are supported with 32, 24, 16 or 8 bit PCM data, and may be set independently on the input and output. The Windows kernel mixer and kernel splitter allow any number of applications to simultaneously access the card.

The card’s mixer functions provide input and output level control, muting and metering. The line input can be mixed back to the output while a DRM-compliant digital loopback is also provided from the output back to the input.

Application

Technical Specification

Technical Specification

Inputs/Outputs

Analog line outputs :
1 unbalanced stereo or 2 unbalanced mono

Analog line inputs :
1 unbalanced stereo or 2 unbalanced mono

Input impedance:
100k

Output impedance:
1k

Maximum signal level (input and output):
2.8V peak

Connectors:
Gold-plated RCA

Dimensions:
175mm length, 100mm hight

Voltages:
All Auricon and Digitorc cards will work on 3.3V and 5V systems

Audio Specifications

Sampling frequencies:
48, 44.1, 32, 24, 22.05, 16, 12, 11.025, 8 kHz (other rates supported via Windows automatic sampling rate converter)

Sampling rate accuracy:
+/- 5ppm

A/D and D/A resolution:
24 bit

Software resolution:
32, 24, 16 or 8 bit

Frequency response at 48kHz sampling (input):
1Hz to 20kHz (+/- 0.2dB)

Frequency response at 48kHz sampling (output):
DC to 20kHz (+/- 0.2dB)

Signal to noise ratio (unweighted):
102dB (output to input loopback)

Distortion (1kHz, 1V RMS):
<-90dB

Channel phase difference (1Hz – 20kHz):
< 0.5 degrees

Analog channel crosstalk:
< -110dB (1kHz), -80dB (20kHz)

Mixer Topology

Output master gain control:
+6dB to -90dB

Output sources:
Wave (kernel mixer), Midi, CD, Line Inputs

Output peak meter support:
Windows XP and Server 2003

Input master gain control:
+6dB to -90dB

Input sources:
Line Inputs, Digital Loopback (configurable as mixer or selector)

Input peak meter support:
Windows XP and Server 2003

Operating System Support

Platforms:
Windows 2000, XP, Server 2003

Supported APIs:
MCI, Wave, DirectSound, DirectShow, MIDI (playback only)

Microsoft driver certification:
Windows 2000, XP, Server 2003

Comments are closed.