Tieline ViA Remote Codec

1213_angled

Summary

Overview

Remotes without limits

Tieline’s mission is to empower you with the technology to go live where no broadcaster has been before, and make it simpler. To achieve this, ViA delivers more IP choices and backup options than ever before.

Connect using dual Ethernet LAN ports, or 2 USB modems, or use the built-in Wi-Fi chipset to connect over Wi-Fi. Use the touch screen to add Wi-Fi access points in seconds. Stream using a cell-phone Wi-Fi hotspot, or connect to hotels and other public Wi-Fi access points using the touch screen web-browser in a snap!

Insert an optional POTS or ISDN module and the codec is instantly transformed to connect over alternative network transports. This means you can configure primary and backup connections over different network transports as required, or use them as your IFB circuit.

Features

  • Intuitive, simple to connect LCD touch screen
  • Supports 2 separate mono connections, stereo, or stereo plus a separate IFB circuit (all connections bidirectional)
  • Dual Gigabit LAN ports
  • Optional ViA ISDN & ViA POTS interface modules
  • Built-in Wi-Fi and 2 x USB cellular options
  • Bonding of multiple IP interfaces with Fuse-IP
  • Includes SmartStream PLUS and Fuse-IP network bonding as standard
  • Automated backup over IP, ISDN or POTS
  • Linear audio plus a wide range of algorithms as standard, including Opus, Tieline Music and Music PLUS, aptX Enhanced, MPEG1 Layer 2, MPEG 3, LC-AAC, HE-AACv1 & v2, AAC-LD, AAC-ELD, G.711 and G.722
  • Features added with periodic updates
  • Ships with a road case, battery and power supply as standard

 

Technical Specification

Input / Output Specifications
Analog Audio Inputs 3 x Female XLR mic / line inputs
Analog Audio Outputs 2 x Male XLR
AES3 In (via input 1) 1 x female XLR (Channel 1 in; shared with Ch1 analog input & Ch 1 AES42 input)
AES 42 (via input 1) 1 x female XLR (Channel 1 in; shared with Ch1 analog input and Ch1 AES3 input)
Auxiliary Inputs/Outputs S/PDIF in/out (RCA), or micro-USB in/out, or 3.5mm (1/8″) Jack line input
Headphones Out 3 x 6.35mm (1/4″) Jacks
Control Port In/Out Four relay inputs and four opto-isolated outputs for machine control via a DB15 connector.
Mic Phantom Power Selectable 10V or 48V phantom power on all analog XLR inputs
AES42 Digital Phantom Power 10V nominal
Input Impedance High Impedance  > 5K ohm (line input); approximately 2K ohm (mic input)
Output Impedance <50 ohm Balanced
Clipping Level +22dBu (XLR input and outputs)
A/D & D/A Converters 24 bit
Frequency Response at 48kHz 20Hz to 20kHz
THD and Noise (Analog) < 0.005% (-86dB) at +16dBu unweighted
THD and Noise (Digital) <0.0001% (-120dB) at -1 dBFS
Analog Signal to Noise >90dB at +22dBu, unweighted
Sample Frequencies
IP Sample Frequencies 8kHz, 16kHz, 24kHz, 32kHz, 44.1kHz, 48kHz
Algorithms
IP Tieline Music, Tieline MusicPLUS, G.711, G.722, MPEG-1 Layer 2, MP3, LC-AAC, HE-AAC and HE-AACv2, AAC-LD, AAC-ELD, Opus, 16/24 bit aptX Enhanced
IP (uncompressed) Linear PCM16/24 bit 48 kHz sampling
Data and Control Interfaces
USB 2 x USB 2.0 Host ports
LAN 2 x 10/100/1000 RJ45 Ethernet ports
Advanced Networking VLAN tagging (IEEE 802.1Q,802.1p)
Serial RS232 up to 115kbps with or without CTS/RTS flow control via female DB9 connector, can be used as a proprietary data channel
Protocols supported Tieline, DHCP, SNMP, DNS, HTTP, IGMP, ICMP, VLAN, IPv4/v6, FEC, SIP/SDP (EBU N/ACIP Tech 3326 compliant), RTP, STUN**
ISDN via module Optional via module slot
POTS via module Optional via module slot
Wireless IEEE 802.11 a/b/g/n with dual band support (2.4 and 5 GHz)
Front Panel Interfaces
Display 4.3 inch TFT Color LCD touch screen
Navigation Touch screen or 5 button navigation keypad
 General
Dimensions 5 5/16″ x 3 1/4″ x 7 7/8″  135mm (W) x 80mm (H) x 200mm (D) including rear connectors
Weight 1.62 kg (with battery)
Power Li-ion internal battery or external 12VDC 3A Power Supply
Operating Temp. 0°C to 40°C (32°F to 104°F)
Humidity Operating Range 15% ≤RH ≤80% (0 to 35°C/32°F to 95°F), non-condensing
Battery
Battery Rechargable Li-ion battery pack RRC2057; 7.5 V, 6.4 AH, 8A; Fast charging; 240g
Battery Operation Up-to 6.5 hours*
Battery Storage Temperature Max: -20°C to +50°C (-4°F to 122°F)

Recommended: -20°C to 25°C (-4°F to 77°F)

Battery Charge Time (inside codec with power supply attached) Charge time with maximum charge current < 4hrs at 25°C
Battery Life Expectancy Minimum 300 charge/discharge cycles as per manufacturer’s charge/discharge recommendations

* Battery life may vary depending on the type of connection and power-saving mode configured

 

Product Resources

Comments are closed